Skyworks and Qorvo: RF Front-End Interview Prep
Skyworks and Qorvo completed their combination on October 5, 2026, with Qorvo becoming a wholly owned Skyworks subsidiary, but neither source we read describes how interviews will run for the combined company. Ask your recruiter which process applies, and prepare RF fundamentals such as matching, S-parameters, noise figure, P1dB, and IP3, plus a short project presentation.
Practice these questions live in a RFIC mock interview with a verified engineer. Book a RFIC mock interview
You have an interview coming up for a power amplifier or filter role, and the posting names Skyworks or Qorvo. Someone tells you the two companies just merged, so which process applies? And what does an RF front-end team actually want to hear from you?
This guide uses Skyworks' public hiring page and product pages, Qorvo's public careers and product material, a Skyworks investor page, and an SEC filing. Candidate reports come from search summaries of Glassdoor pages and are labeled as anecdotal. The practice prompts are ours, not reported questions.
What changed in October 2026 for Skyworks and Qorvo?
Skyworks' investor page says the two companies completed their combination on October 5, 2026. Qorvo's SEC filing on that date describes Qorvo becoming a wholly owned Skyworks subsidiary, renamed Qorvo Technologies, LLC. A search summary of the press release says the combined company continues to operate as Skyworks.
What that means for hiring is less clear. Neither source we read describes how interviews will be run for the combined company. Both sites we looked at still had separate careers material. Ask your recruiter which company's process you are in, who the hiring manager is, and which site the role belongs to. Do not assume anything beyond that.
What the products tell you about the work
Skyworks' product pages list front-end modules, amplifiers (cellular power amplifiers, low noise amplifiers, gain blocks), filters including BAW, and several switch types. The front-end module page describes combining multiple RF functions in one package, with categories such as cellular, Wi-Fi, GNSS, automotive, and cellular IoT.
Qorvo's products page lists mobile parts such as filters, power amplifiers, LNAs, and switches, and a search summary of its site mentions GaAs, GaN, SAW, BAW, CMOS, and SiGe. A recent Qorvo release on a C-band radar front end pairs a BAW-switched filter bank with 50 W and 200 W GaN power amplifiers, which shows how far the work reaches beyond phones into defense and aerospace.
None of this tells you what your team does. A role can sit in PA design, filter design, module integration, test, or applications. Read the posting for process technology and frequency band, then prepare for those specifics. If you are choosing between RF and other analog paths, our AMS versus RFIC interview comparison is a good place to start.
What each company says publicly about interviews
| Stage or topic | What the employer says publicly | What to prepare or ask |
|---|---|---|
| Skyworks, first contact | Interviews initially comprise a phone interview | Ask who the caller is and whether it is technical |
| Skyworks, next steps | Then meetings with the hiring manager and team members; HR communicates the outcome | Ask how many sessions and how long |
| Skyworks, paperwork | Candidates sign an interview non-disclosure statement; selected candidates complete a background check and drug screen | Read the statement before your answers include project details |
| Skyworks, advice | Research the company, support accomplishments with specifics, ask about next steps | Prepare questions about the team |
| Qorvo, materials | Per a search summary of its interviewing page: bring a portfolio or project you can present | Ask whether a presentation is expected and how long |
| Qorvo, conduct | Same summary: business casual, no questions about previous salary, expect questions about past working relationships | Prepare a calm answer about a past disagreement |
We could read Skyworks' page directly. Qorvo's page blocked our fetch, so the Qorvo row relies on a search-result summary of it. Check the live page yourself.
What candidates report (anecdotal)
A search summary of Glassdoor pages for Skyworks describes a phone screen, then technical rounds, and sometimes a full day with a panel. Reported difficulty averaged about 3 out of 5, and reported timelines ranged from days to a couple of months. Topics mentioned were Smith charts, transmission lines, S-parameters, filter basics, VNA and spectrum analyzer basics, power amplifier basics, and noise figure, IP3, and P1dB.
A similar summary for Qorvo describes a phone screen, sometimes a presentation of past work, then several one-on-one or panel conversations, with some engineering interviews lasting most of a day. Reported difficulty was also near 3 out of 5. Topics mentioned included Smith charts, matching networks, PA nonlinearity versus stability trade-offs, and load-pull for PA characterization.
Treat all of this as a small, self-selected sample, often several years old, and not as either company's process. Formats vary by team and level, and the merger may change them. We did not see reliable pay figures in the sources we could read. For compensation, filter levels.fyi by company, title, and location, and read our notes on negotiating leverage for analog and RF engineers.
A study plan that fits the public picture
Nothing here predicts your questions. It is a sensible spread for an RF front-end role.
- Rebuild the basics from our RFIC design interview guide: impedance matching, S-parameters, stability, and the Smith chart without a calculator.
- Practice noise figure, P1dB, and IP3 using the noise figure and two-tone linearity questions. Be ready to say which spec dominates in a receiver LNA and which in a transmit PA.
- Read the next post in this series on RF amplifier and LNA questions for amplifier-specific prompts.
- Know the measurement side: what a VNA, spectrum analyzer, and load-pull setup each tell you, and what they cannot.
- Prepare a presentation of one project, ten to fifteen minutes, with the requirement, your contribution, a measured result, and what you would change.
For the project, our guide to explaining past tapeouts and projects helps. Respect the confidentiality limits above: show a simplified version, not employer data.
What questions are worth asking?
Ask which bands, standards, and process technologies the team works on, how design and test engineers split debug, and what the hand-off from simulation to lab looks like. Also ask how the recent merger has affected the team's roadmap and reporting lines. A direct, reasonable answer is useful, and so is a vague one. Our list of hardware interview red flags explains how to read either.
If you want to rehearse a whiteboard Smith chart or a project talk with someone who will push back, you can book a mock interview on MockVise.
Sources: Skyworks hiring process, Skyworks front-end modules, Skyworks amplifiers, Skyworks and Qorvo combination, Qorvo SEC Form 8-K, Qorvo products (search summary), Interviewing at Qorvo (search summary), Qorvo C-band radar news via Semiconductor Today, Glassdoor Skyworks RF engineer (search summary), Glassdoor Qorvo (search summary). This is general preparation guidance, not an official process or a list of reported company questions. Candidate reports are anecdotal and may be out of date, and merger-related details may change, so confirm the format and your hiring entity with your recruiter. MockVise is not affiliated with or endorsed by Skyworks Solutions, Qorvo, Glassdoor, or Semiconductor Today.FAQ
Q: Which company's interview process applies after the merger? We found no public description of how interviews will be run for the combined company, and both sites still had separate careers material. Ask your recruiter which company's process you are in, who the hiring manager is, and which site the role belongs to.
Q: What does Skyworks say publicly about its interviews? Interviews initially comprise a phone interview, then meetings with the hiring manager and team members, and HR communicates the outcome. Candidates sign an interview non-disclosure statement, and selected candidates complete a background check and drug screen.
Q: What topics do candidates report being asked? Anecdotal Glassdoor summaries mention Smith charts, transmission lines, S-parameters, filter basics, and noise figure, IP3, and P1dB for Skyworks. For Qorvo they mention matching networks, PA nonlinearity versus stability trade-offs, and load-pull. These are a small, self-selected sample, not either company's process.
Q: Should I prepare a project presentation? A search summary of Qorvo's interviewing page says to bring a portfolio or project you can present, so ask whether one is expected. Keep it to one project with the requirement, your contribution, a measured result, and what you would change, in a simplified form that respects confidentiality.
Related guides
RF Amplifier and LNA Interview Questions
Prepare for RF amplifier and LNA interview questions with noise figure, linearity, matching, stability, and PA efficiency explained from public vendor and workshop documents.
Microchip and STMicroelectronics: Microcontroller and Embedded Silicon Interviews
Prepare for microcontroller and embedded silicon interviews at Microchip and STMicroelectronics with public company material, clearly labeled candidate reports, and MockVise practice prompts.
SiFive, Ampere, and Rivos: RISC-V and CPU Startup Interviews
Prepare for CPU and server silicon interviews at SiFive, Ampere, and Rivos with verified public company context, labeled candidate reports, and a clear list of what to ask your recruiter.
MediaTek and Samsung LSI: Mobile SoC Interview Prep
Prepare for mobile SoC interviews at MediaTek and Samsung System LSI with public hiring guidance, market context, and clearly labeled candidate reports.
Practice with engineers who've run these interviews
Book a 1-on-1 mock interview with verified experts from Intel, NVIDIA, Qualcomm, and Apple. Practice these questions live in a RFIC mock interview with a verified engineer.
Find a RFIC expertAlready running these interviews at work? Get paid to run them on MockVise, anonymously and on your own hours. Become an expert